Qomo QD1200 Manuel d'utilisateur

PRECAUTIONS Please follow these precautions: To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent electrical sho

Step 6: Connections for external control from the computer. Use the computer RS232 cable (9-pin to 9-pin) to make the RS 232 connectorUSB connectorof

INSTALLING QOMO VISUALIZER SOFTWARE This function is to snap and display images with the USB interface, which includes displaying static and dynamic p

D. Click , then copy files E. Click to finish the setup. F. Shut down your computer when prompted, so the changes will take effect. * P

display resolution higher than XGA (1024*768). 2. Operating system: Windows XP SP2 (Service Pack 2). 3. Must use the high-speed USB cable provided

LIGHT The arm lights are on when the power is on. Each time you press the “LAMP” buttons, the lighting changes as below. The arm lights turn on

FOCUSING When the Visualizer is turned on the focus automatically adjusts to the stage, it is not necessary to readjust the focus if you are only work

text file, switch to the text mode to get a clearer text effect. COLOR AND B&W MODE SWITCH Press “B&W” once to enter the Black & White m

IMAGE REVERSION Press the “MIRROR” button once to V-reverse the image and the vertically mirrored image will be displayed. Press the “MIRROR” button

visualizer can be used as a 3-D scanner for your computer. Connect the Visualizer to your computer with the supplied USB cable. The QOMO Visualizer S

folder on your computer. Display the current visualizer images continuously (the fastest frame rate is 10 frames per second） Stop image continuous

CONTENTS: PARTS IDENTIFICATION ... 3 CONTROL PANEL ...

When the indicator of “Current RS-232 Connection Status” is green, that means the connection between the visualizer and the computer’s RS232 connecto

BE EF 03 06 00 BA D2 01 00 00 60 01 00 In the POWRE ON box,Input : be, ef, 03, 06, 00, ba, d2, 01, 00, 00, 60, 01, 00. Then use the same inp

Visualizer’s TXD pin------------Projector’s RXD pin Visualizer’s GND pin------------Projector’s GND pin 5. If you can not use buttons on the operatio

1. Check to see if the source control codes of projector are correct. 2. Check to make sure the connection between the visualizer and the projector

Cautions: a. Don’t lay the unit down flat. b. Don’t try to stand it on its rear or sides. c. Don’t try to pick up this unit by pulli

Image Freeze Yes Image Save & Recall 9 frames save, 3 x 3 multiple screen display Arm light: 1.5W LED lamps x 2 Lights Back light: 4W LED lamps

Projector RS232 cable (6-pin to 9-pin) USB cable Audio convert cable AC adapter User’s manual Quick Start-up guide Software CD Infrared remote contr

USB IMAGE CAPTURE... 18 CONTROLLING THE VISUALIZER FROM THE COMPUTER ...

Save (Save captured images) Far/Near (Focus far or near) Mem (Multiple Screen Display) Ppw (Control the projector On/Standby) Pin (Projector input sig

REMOTE CONTROL POWER (Control the visualizer power On/Off) ROTATE (Rotate the image) FREEZE (Freeze the image) LAMP (Control the arm lights and back

AUTO (To auto adjust brightness, auto white balance and auto focus) CCD/PC1/PC2 (CCD/RGB input signal selection) S-VIDEO/ VIDEO (S-VIDEO/ VIDEO input

1. Use one hand holds the base of the visualizer, use the other hand carefully lift up the camera stand of the unit. 2. Open the arm lights and rota

Connect visualizer’s PROJECTOR port to the RGB IN port of the projector port with the RGB cable provided together the visualizer. ProjectorRGB Input

Note: You can connect a laptop computer to the RGB IN port of side panel with a RGB cable. Step 4: Connect to the first video equipment with S-Video