Qomo QP10 Manuel d'utilisateur

1 PRECAUTIONS Please follow these precautions: To prevent fire or shock hazard, do not expose the unit to rain or moisture. To preven

10 Step 3: Connect power source. Once the QP10 is set up, plug the power adapter that comes with your QP10 into the DC 12V IN connector and an

11 A. Insert the CD-ROM that comes with the QP10 into the CD-ROM drive. If Autorun is enabled on your system, then the Software

12 computer’s USB port. If this port has USB2.0 driver installed, there is no need to install the USB driver again. 6. If you cannot capture image

13 capture. (If you have set the time limit, it will stop automatically when the time is up.) The video file is AVI format. C. Set the Frame Rate Cli

14 Install QP10 on the wall and position the camera head vertical to the base. Ceiling mounting application Attac

15 Notes: when not use mirror to reflect objects, the user must use remote control to exit the mirror mode. The visualizer set the mirror mo

16 SPECIFICATIONS Pickup device 1/4” professional CCD Total pixels 470,000 RGB Output Pixels 780,000 Lens* F=1.6~3.7 mm/ f=3.9~85.8mm Focus

17 Power requirements 12V/4A external AC adapter Dimension(mm) Setup: 351x172x327mm Folded: 308x172x85mm Packing: 430x183x346mm Accessory AC adapt

2 CONTENTS: PARTS IDENTIFICATION ... 3 CONTROL PANEL ...

3 PARTS IDENTIFICATION CONTROL PANEL Power button : Press the button once to power on the QP10; press the button again to power off th

4 Each time you press the button, the lighting changes as below: The body lights on The back light on All the lights off Zoom button / . Pr

5 the “POWER” button again to power off the QP10. NEGPress the “NEG” button once to display file negatives and press the “NEG” again to display norm

6 image mode. TITLEPress the “TITLE” button once to freeze top 1/8 of the screen. Press the “TITLE” button again to exit. AUTOPress the “AUTO”

7 DC-12V INExternal 12V power adapter input connector S-VIDEO-OUT/VIDEO-OUTQP10 video output RGB-OUT1/ RGB-OUT2RGB outputOutput the same signal

8 Attention: When mark E is in line with A, the camera head and the base are parallel. When mark E is in line with mark D,

9 6. Making connections: Before making any connections, turn off all the power. Please ensure that the QP10 along with all other equipments are tur